o Tune to a channel that's not coming in well. Signal Strength Meter: (page 7) o Press the Meter button.o Scanning produces a list of found channels. Do nothing more until scanning process is complete (progress will display on the screen). o Highlight Rescan if scanning for the first time or when station frequencies have changed. o Highlight Auto Scan in the column headed Channel. Scanning for channels: (page 6, top right) o Box does not allow manual addition of channels.Activating analog pass-through: Turn box off, OR, with the box on, press A/D button to switch between analog and digital.Audio problems: Wrong audio channel: Use Audio button on remote to change the audio track.Manual adding of channels: Not possible with this box.Setting the output channel to 3 or 4: Switch on back of box.Program the remote: Use the instructions on page 3 (9900 model) or 4 (9950 analog pass-through model).Lights: Green light means ON Red light means OFF/STANDBY blinking means a signal is being received from the remote.Digital Stream 9900 (no analog pass-through) Digital Stream 9950 (with analog pass-through) (from Radio Shack) Page numbers refer to the owner's manual that comes with your converter box. (page 18)įor more information on digital TV, visit OPB's Web site at opb.org/digital Changing the energy-saving power-down function: Press Menu, highlight and select Sleep Timer, set to OFF if you're going to be programming a VCR to record.Aspect Ratio problems: Press the Zoom button or hightlight TV Aspect Ratio, then select 4:3.Audio problems: Wrong audio channel: Press MTS button & be sure 1st channel is selected.Closed Captioning: Press CCD button Settings should be OFF or CC1 or CS1.Manual adding of channels: Not possible.Signal Strength Meter: Press the Signal button.Scanning for channels: Press Menu button, highlight and select Auto Program by pressing OK.Activating analog pass-through: Turn the box off (light should be red).Setting the output channel to 3 or 4: Use the switch on the back of converter box.
0 kommentar(er)
